We are pleased to announce the release of our complete deep hole drilling system which includes 3 outstanding product ranges to meet the diverse and often extreme demands of deep hole drilling. Covering a diameter range from 9.50mm to 114.8mm and depths up to 2.6 metres, this specialised range includes our XL and 3XL drills together with the innovative BT-A drill, which sets new standards in accuracy, tool life and performance in this application sector.
We are pleased to announce the launch of a new tougher K35 carbide insert grade for use in both Revolution & Core drill ranges, which provides excellent resistance to chipping while maintaining outstanding tool life.
We are pleased to announce the launch of a new special geometry drill insert as the latest addition to the GEN3SYS® range. Developed for applications with less than ideal machining set-ups, the geometry provides increased cutting edge strength.
We are pleased to announce that the lead times on non-stocked standard and Insta-Quote drill inserts have been reduced by up to 50%.
We are pleased to introduce ISO 6149 metric style AccuPort 432® Port Contour inserts without the identification ridge as a stocked standard item.
These inserts allow users to produce the finished port form in one step, eliminating the use of the identification ridge.
We are pleased to announce the completion of the new Revolution Drill™ range by expanding it to include diameters from 86.36mm to 101.60mm.
We are pleased to announce the re-introduction of the 3-8 Series Original T-A® Inserts with AM200® coating as a stocked item in metric sizes.
We are pleased to introduce an addition to the AccuThread 856® line of threadmills. Indexable threadmilling holders are offered in multiple flute configurations and feature a bolt-in type, and a patented pin style locking system which ensures unsurpassed repeatability.
We are pleased to announce the release of C2 Carbide Cast Iron Geometry for GEN3SYS® Inserts.
The inserts are coated with AMEC's proprietary AM200® coating which allows for optimum performance with regards to penetration rates and tool life.
The additional product offering will extend through our entire diameter range from 12mm to 32mm.
Insta-Quote™ is the most powerful, flexible and rapid method available for obtaining special AMEC tool holders and insert quotations on demand online.
Insta-Quote™ is already used across Europe, and is not available to all distributors and authorised account holders in Pounds and Euros.
AMEC have developed the T-A® system to offer improved geometries and coating's to enable customers to increase the penetration rates in Structural Steel drilling.
We are pleased to announce that the T-A® Flat Bottom range has been extended to allow the creation of flat bottom holes in sizes 34.36 to 65.28mm.
We have made some adjustments to metric AccuPort 432® tools to better align with the metric port specification ISO 6149 and to avoid confusion, has changed the relevant part numbers to minimise the possibility of using a combination of old and new design tools.
We are pleased to announce the addition of seven new holders to our already extensive T-A® holder range. These new holders have straight flutes improving swarf evacuation in horizontal applications whilst also increasing the maximum hole depth of the excellent AMEC T-ACR chamfer ring up to 7.5 x diameter.
Adjustable indexable Carbide Drills which are designed to produce high quality large diameter holes and deliver excellent productivity with a competitive cost per hole:
Core Drill™
- Opens an existing hole in a single operation
- Can be used as a rotating or stationary tool
- Adjustable diameters reduce inventory and cost
Revolution Drill™
- Drill depths up to 4.5 times diameter
- Removable cartridges for easy replacement
- Less tool inventory needed for range if diameters
We are pleased to announce the introduction of the Y to 2 Series GEN2 T-A® Drill Insert with High Elasticity (HE) geometry:
- Includes all the exclusive features of standard GEN2 T-A® Notch Point® geometry
- Curved cutting edge, helical margin and AM200® coating
- Available in both Carbide and HSS versions of GEN2 T-A® Inserts in Series to 2