Allied Machine & Engineering is excited to announce that the GEN3SYS® XT Pro product line is now available.

 

The new GEN3SYS® XT Pro line of inserts is a combination of substrate, geometry and coating designed for drilling specific ISO material classes. This launch includes geometries for P (Steel), K (Cast Iron), and N (Nonferrous) materials. Each geometry is tailored specifically for maximum performance in these material classes. The inserts are available in diameters 11mm-35mm.

 

Along with the material specific geometries, a new holder was developed to improve chip evacuation and coolant flow to the work piece interface. The new holders are available in 3, 5, 7, and now 10xD configurations. Each length is available only in straight flute with or without a flat, and in imperial or metric shanks.

 

The combination of the GEN3SYS® XT Pro inserts and holders has proven to produce longer tool life and provide increased penetration rates giving the XT Pro a competitive advantage over similar high penetration drilling systems.

 

New GEN3SYS XT Pro Holder nomenclature:

 

HXT

10

18

S

-

25

FM

 

XT Pro

Length

Series

Flute

 

Shank Diameter

Flat Configuration

 

New GEN3SYS XT Pro insert nomenclature:

New GEN3SYS XT Pro Item Number Examples

(Steel) XTP20-20.00

(Cast Iron) XTK18-19.05

(Nonferrous) XTN12-12.00

 

XT

K

18

-

19.05

 

XT Pro

ISO Material

Series

 

Diameter (mm)

 

All diameters will be called out in millimetres using 2 decimal places with non-stocked items

available in every .01mm (.0004”) diameter increments. Non-stocked diameters will have a 10-

day lead time.

 

Example:             Customer needs a 13.29 mm K Geometry XT Pro insert

Round down two decimal places to 13.29

Item number would be XTK13-13.29

 

All GEN3SYS® XT Pro items will follow the existing GEN3SYS® discount schedules. Hard copies of the catalogue are available by contacting our Marketing Department on marketing.eu@alliedmachine.com

Allied Machine & Engineering is excited to announce that the GEN3SYS® XT Pro product line is now available.

 

The new GEN3SYS® XT Pro line of inserts is a combination of substrate, geometry and coating designed for drilling specific ISO material classes. This launch includes geometries for P (Steel), K (Cast Iron), and N (Nonferrous) materials. Each geometry is tailored specifically for maximum performance in these material classes. The inserts are available in diameters 11mm-35mm.

 

Along with the material specific geometries, a new holder was developed to improve chip evacuation and coolant flow to the work piece interface. The new holders are available in 3, 5, 7, and now 10xD configurations. Each length is available only in straight flute with or without a flat, and in imperial or metric shanks.

 

The combination of the GEN3SYS® XT Pro inserts and holders has proven to produce longer tool life and provide increased penetration rates giving the XT Pro a competitive advantage over similar high penetration drilling systems.

 

New GEN3SYS XT Pro Holder nomenclature:

 

HXT

10

18

S

-

25

FM

 

XT Pro

Length

Series

Flute

 

Shank Diameter

Flat Configuration

New GEN3SYS XT Pro insert nomenclature:

New GEN3SYS XT Pro Item Number Examples

(Steel) XTP20-20.00

(Cast Iron) XTK18-19.05

(Nonferrous) XTN12-12.00

XT

K

18

-

19.05

 

XT Pro

ISO Material

Series

 

Diameter (mm)

All diameters will be called out in millimetres using 2 decimal places with non-stocked items

available in every .01mm (.0004”) diameter increments. Non-stocked diameters will have a 10-

day lead time.

Example:             Customer needs a 13.29 mm K Geometry XT Pro insert

Round down two decimal places to 13.29

Item number would be XTK13-13.29

All GEN3SYS® XT Pro items will follow the existing GEN3SYS® discount schedules. Hard copies of the catalogue are available by contacting our Marketing Department on marketing.eu@alliedmachine.com

Renowned U.S. manufacturer offers expertise in specialty tool manufacturing

Dover, OH - Allied Machine & Engineering, a leading manufacturer of holemaking and finishing tooling systems, announces it has purchased Superion, Inc of Xenia, Ohio USA.

Superion built its reputation as a manufacturer of innovative, special solid carbide and PCD tipped rotary cutting tools such as end mills, reamers, drills, and step tools.  They are widely recognized as experts in developing customized solutions in specialty tooling.  With one innovation after another, they have continually reinforced their reputation as the world leader in customized, specialty tools.

“By acquiring Superion, Allied has added a wealth of over 50 years of experience in special tool manufacturing.  Their highly-skilled associates operate CNC equipment and utilize sophisticated quality control systems to ensure the highest standards of quality” said Bill Stokey President/CEO of Allied Machine & Engineering.  “Their product expertise will provide tremendous opportunities for the growth of Allied products.”

Customer sales and support will continue to be provided by both Allied and Superion, reflecting the strong relationships established by both companies.

“I look forward to this new relationship with Allied and all of the additional resources that come with it,” adds Al Choiniere, President of Superion, Inc. “Our combined skill sets will enable Superion to carry on, and expand, our long-standing tradition of innovation in the holemaking sector.” 

About Superion:

Superion is innovative and dedicated people providing quality hard metal cutting tools to global markets with profit, fairness and integrity to customers, associates, and suppliers.  For more than 25 years, Superion has been the consistent leader in technological innovations for improving challenging operations. Manufactured to your specifications and Superion's high quality standards, you can expect superior performance, closer tolerances and extended tool life with increased productivity.  Highly trained Superion Application Engineers are available to assess specific needs and provide cost-effective solutions for the most complex and demanding operations.

Allied Machine & Engineering are proud sponsors of Debbie Young who is running the London Marathon 2017 in aid of the epilepsy society.

Debbie is the wife of our Regional Sales Manager Darren Young. She has taken this enormous task on to raise funds and awareness for the epilepsy society, a charity that is very close to their hearts as you can read in Debbie’s story on her JustGiving page.

We wish her all the best for reaching her Target of £2000, which will make all the hard work training and fundraising worth it!

 

Visit Debbie's Just Giving Page

Allied Machine & Engineering announces additional AccuPort 432 Port Contour Inserts available in the SAE J1926 specification. In an effort to provide the best port contour cutters in the marketplace, AMEC has added four new sizes to the J1926 specification. With the addition of these four new inserts, the tools are manufactured closer to the nominal dimensions for the specification, improving the customer’s manufacturing capability.

Below are the holder item numbers with the updated corresponding inserts:

table

 

Allied Machine & Engineering is pleased to announce the expansion of our AccuPort 432/AccuThread 856 Kit program. The kits are now available in the various stocked specifications in the AccuPort 432 line. There are now kits available in the J1926, I6149, G1731, and AS5202 specifications.

The J1926 specification is available in both metric and imperial shanks for both ferrous and non-ferrous applications. The I6149 specification is available with metric shanks for both ferrous and nonferrous applications. The G1731 specification with a metric shank is designed for cast iron applications, and the AS5202 comes with an imperial shank for both ferrous and non-ferrous applications.

The kit includes an AccuPort 432 Port Contour Cutter, T-A® or GEN2 T-A® pilot insert(s), Port Form inserts, and an AccuThread 856 threadmill. Below are tables that detail the items included with the kit, along with kit item numbers and pricing. All kits will have a 10 day lead time, if not in stock.

picture Table 1

picture Table 3picture Table 2

 picture Table 4

 

Product catalogs will be updated for the next printing. Online versions will be updated soon. The pricelist has been updated to reflect these changes. It can be viewed under Distributor Utilities on our website, www.alliedmachine.com. If you have any questions about this product addition, please email enquiries.eu@alliedmachine.com.

 

AMEC® wishes to announce a new item number system for the MaxThread™ range of solid thread mill products to bring them in line with the recently introduced MaxThread™ tooling with through coolant. The below table shows a comparison not only between the old and new formats but also between metric and non-metric standards.

Please be aware that both numbering systems will be valid for a changeover period until the 1st of December 2016.

MaxThread new pro nr EN

Allied Machine & Engineering Corporation, Dover OH, is pleased to announce that Allied has acquired a majority of the shares of Wohlhaupter GmbH of Frickenhausen, Germany, Wohlhaupter USA, and Wohlhaupter India.

Allied Machine & Engineering is proud to announce the publication this week of a new catalogue. This combines the general purpose product ranges of our tried and trusted T-A® Original drilling system and the solid carbide MaxThread™ thread milling programme which now includes the exciting new through coolant option. The T-A® Original inserts were reduced in price recently thanks to advances in manufacturing and increased buying power.

 

 Oder Now buttom

 

Allied Maxcut Engineering Co. Limited is proud to announce its new company name Allied Machine & Engineering Co. (Europe) Ltd. Under our new company name and global branding, our focus remains on providing outstanding holemaking solutions, customer service and support.

 

Allied Machine & Engineering will continue to go above and beyond the limits of holemaking technology, constantly developing new tools and improving applications. The merger is also expected to result in greater efficiencies and benefits for our customers, such as the new reduced list price of the T-A® Original Programme, and the introduction of the new Through-Coolant Threadmills.     

 

New Managing Director Paul Crawford reinforces AMEC’s commitment to offering products and services of high quality, creating value for our customers. Paul is certain that the recent amalgamation between the USA and Europe reflects the continued drive for improvement and technological advancement for which AMEC® has become well known.

 

Providing solutions since 1941, this year we are celebrating our 75th Anniversary. We will be offering an array of celebrations throughout the year, particularly with our presence at Exhibitions worldwide.  Further information can be obtained by speaking to your Regional Sales Engineer or Manager.

 

Exciting times lie ahead for Allied Machine & Engineering and we hope you will continue to support us on our journey.

 

 

MACH saw the UK launch of the NEW modular APX™ Drill and the Allied Criterion Boring sytems. Visitors had the opportunity to see the new products running on a Haas VF2 throughout the show on our stand.

METAV saw the launch of the ALVAN reaming products in Germany, following on from the successful introduction of the APX™ Drill and Criterion Allied boring systems at EMO last year.

Allied Maxcut (AMEC®) are pleased to announce a restructuring of pricing for all products in the Allied Criterion range as of Monday 09 June 2014.

USA

EUROPE

GERMANY          

                                                  

Allied Machine & Engineering       

Allied Machine & Engineering Co. (Europe) Ltd     

Wohlhaupter GmbH

   

120 Deeds Drive

93 Vantage Point

Maybachstrasse 4

   

Dover OH 44622

Pensnett Estate, Kingswinford

72636 Frickenhausen

   

United States                               

DY6 7FR UK

Gernany

   

                                                         

                                                                                

                                                                                            

                              

Tel: +1 (0)330.343.4283         

Tel: +44 (0)1384 400 900

Tel: +49 (0)7022 408-0

   
Email: info(at)alliedmachine.com Email: enquiries.eu(at)alliedmachine.com Email: info(at)wohlhaupter.de    
 

Registered in England No: 2768532