AMEC has launched a new range of inserts the high performance GEN3SYS® drilling system, which use a dedicated geometry developed specifically for use when cutting various grades of cast iron to give increased tool life and wear resistance in high productivity environments.
AMEC's ground breaking Revolution Drill and Core Drill ranges have been extended further with the launch of the latest increased diameter range to give even greater manufacturing and production flexibility, enabling diameters of up to 142.75mm to be drilled.
High penetration GEN3SYS® drills from Allied Maxcut (AMEC) have exceeded expectations at a major sub-contract manufacturer, by delivering a tool life improvement of almost 20% in a production operation where the company felt it was already achieving good results from existing tooling.
Against the background of Euro 2008 and £multi-million transfer deals, two local youth & junior teams from Dudley are achieving great things, with a little help on a more down to earth scale from its main kit sponsor, Allied Maxcut (AMEC).
Launched in Europe at this years MACH exhibition, the new Core Drill™ from Allied Maxcut (AMEC) has already achieved outstanding results in North America, where it was introduced in mid-2007. With one customer, Wellhead Inc of Bakersfield California, the Core Drill helped them reduce valve body manufacturing time by 85%.
The recent MACH 2008 exhibition a the NEC, Birmingham has proven to be one of AMEC's most successful shows to date now that the enquiries have been fully processed and actioned by the company's sales and marketing team.
Two new adjustable high performance drill ranges have been launched by Allied Maxcut, which provide high metal removal rates together with the flexibility of being able to alter their cutting diameters to meet precise production requirements and hole sizes up to 142.75mm.
The countdown to the UK’s largest manufacturing technology and tooling exhibition, MACH 2008, continues apace as AMEC finalises plans for the show which takes place at the NEC in Birmingham from 21st – 25th April 2008.
AMEC's innovative GEN3SYS® high penetration drilling system has been extended, enabling the high performance benefits and characteristics of the range to be used for drilling holes from 12mm up to 32mm diameter.
AMEC's busy training centre at its European HQ recently hosted a series of intensive product training sessions for two of its key distributors from Italy and Belgium.
AMEC is finalising plans for its attendance at one of Germany’ largest trade shows, METAV, which takes place in Düsseldorf between 31st March and 4th April 2008. Our stand number is 03.F24 and is 60m2 and examples form our full range of products will be on show at the exhibition.
After the success of EMO, AMEC is already gearing up for the next major exhibition in the calendar, MACH 08, to ensure the same level response from existing customers, new users and distributors is achieved.
The EMO 2007 Exhibition has been hailed as a huge success by everyone involved in the show at AMEC, both in the UK and USA. During the five day show held in Hanover from 17th September, well over 1,500 visitors came onto the stand to discuss a range of manufacturing, tooling and production opportunities with our technical sales team.
A major contract with one of Germany's largest hydraulics sub-contracting businesses has been secured by AMEC distributor, ProzerSpanung.
AMEC has developed a strong initial presence in the increasingly important manufacturing market in Russia with the development of a new distributor in Moscow. Following market research by the distributor, a substantial stock order has been placed to service the needs of its range of existing customers, who are seeking to improve their productivity and tool life.
Stand number D78 in Hall 4 is the location of AMEC's 91m2 exhibition area at the prestigious EMO Hannover exhibition, which takes place between 17th and 22nd September 2007.
High performance structural steel drills from Allied Maxcut are helping Lincoln based fabricator and contract manufacturer, J.A. Harvey Ltd, meet demand by delivering extended tool life and increased cutting speeds.
When it comes to drills and agriculture, it's normally seed drills that are the topic, but when a major tractor manufacturer in Bavaria needed high performance production drills, they chose Allied Maxcut after running a detailed comparative test against other drill companies....
A new hydraulic port finishing kit has been launched by Allied Maxcut, which enables fully finished and threaded hydraulic ports to be produced in just two steps by combining a standard port contour cutter and dedicated carbide thread mill in a single kit...
Following the recently completed total re-design of Allied Maxcut's website and integrated e-commerce solutions, a new on-line ordering service has been launched by the company to simplify and speed product selection, ordering and transactions for its UK and European distributor network....
Allied Maxcut would like to sell pre-high strength holders that are available in our stock, at greatly reduced prices. A list of our prices is attached herewith, and only available to our Distributors from June 1st 2007...
The inaugural Tooling Matters exhibition in March 2007 has proven to be highly success for Allied Maxcut, with interest being shown in the company's wide range of high performance cutting tools, which were on display at the show...
A fully revised and updated product selector has been introduced by Allied Maxcut to assist in the selection of its high performance drills range and ensure the most suitable product is chosen for a particular application....
GEN3SYS®, the new high penetration replaceable insert drilling system from Allied Maxcut will be on show at this year's Tooling Matters conference and show at the Warwick Hilton Hotel on 20th March 2007...
Allied Maxcut's class leading high performance drilling system for structural steel now incorporates the company's latest innovative GEN3SYS® range which further extends the range's performance and tool life for structural steel and thin plate drilling applications...
The Allied Maxcut range of 'AccuThread' thread mills provide a fast and precise solution for high speed internal thread milling applications, including both solid carbide and indexable inserts covering a range of metric ISO, British Standard (BS) and other widely used parallel and taper thread forms...
Leading German tooling and distribution group, H.Sartorius Nachf. GmbH, has awarded Allied Maxcut a top rated 'A' supplier rating following a rigorous evaluation as part of its ongoing quality procedures...
AMEC's comprehensive reamer range has been designed to not only meet requirements of dimensional accuracy and surface finish for precision hole machining, but also to deliver high productivity...
Allied Maxcut's new technical & training centre is open for business at its UK based European headquarters in Kingswinford, to provide distributors and customers with detailed information, tooling trials and application testing as well as training on the company's complete product range...
The first major supplier and customer event organised by Cromwell Tools at Millbrook Proving Ground near Bedford in early October, has been hailed as a huge success by Allied Maxcut, which was one of the specially invited exhibitors...
The patented GEN2-TA™ replaceable insert drilling system from AMEC, uses innovative geometry and advanced coatings to give a 20% increase in productivity as well as extending tool life on ferrous and non-ferrous materials and improving hole accuracy and finish...
A new high penetration replaceable insert drilling system has been launched in the UK and Europe by AMEC, which uses innovative helical insert geometry to give significantly faster penetration and increased productivity compared to similar products and solid carbide drills...
Allied Maxcut has extended its UK technical field sales operations with the appointment of four new regionally based sales engineers to support its national distribution network and provide detailed applications engineering expertise...